Capacitor Discharge Spot/Press Welder

Adopt three-phase AC power input to the energizing transformer, output to the rectifier bridge under the control of the welding controller HRC211, rectify to DC and then charge the rechargeable capacitor, after completing the charging, the welding controller controls to cut off the external power grid, and through the discharge SCR conductive discharge welding transformer output low voltage high current to weld the workpiece.

VIEW

MFDC Spot/Press Welder

It is a kind of resistance welding process using MF DC inverter power supply (1KHZ/2KHZ/4KHZ can be set), the power input is three-phase power frequency, the output is single-phase medium frequency, due to the increase of frequency, the welding transformer volume is greatly reduced, the welding time can be calculated in milliseconds, the welding energy is more concentrated, the welded workpiece is placed between the upper and lower electrodes, the welding current and welding time are set through the medium frequency inverter resistance welding controller, and the pressure between the electrodes is set. After the welding current and welding time are set, the pressure between the electrodes is set, and when the high current passes through the welded part, the high temperature generated by the contact resistance melts the welded base material and forms the weld nucleus, which can greatly reduce the demand of the power grid compared to the AC single-phase welding power source.

VIEW

MFAC Spot/Press Welder

It adopts three-phase power input to the inverter, which converts the industrial frequency power source into medium frequency power source (50HZ-400HZ adjustable) and then directly outputs AC welding current through the welding transformer, which can greatly reduce the power supply demand of the grid.

VIEW

AC Spot/Press Welder

AC spot projection welding machine uses single-phase AC input, the workpiece to be welded is placed between the upper and lower electrodes. After the welding current and welding time are set by the resistance welding controller, set the pressure between the electrodes. When the large current passes through the parts to be welded, the high temperature generated by the contact resistance will melt the base metal to form a weld core.

VIEW

AC Seam Welder

A continuous spot welding process, the workpiece is placed between the upper and lower electrode wheels after lapping. Under the pressure between the electrode wheels, the electrode wheels rotate and discharge continuously or intermittently to achieve the purpose of welding. By inputting AC power, the welding time is controlled by the AC controller , and the current is controlled by the conduction angle of the SCR.

VIEW

MFDC seam welder

It is a continuous spot welding process in which the workpiece is lapped and placed between the upper and lower electrode wheels, Under the action of the pressure between the electrode wheels, the welding purpose is realized through the rotation of the electrode wheel and continuous or intermittent discharge. The medium frequency DC power supply is adopted, and the current and welding time of the whole welding process are controlled by the medium frequency controller

VIEW

Butt Welder

It is a process of using AC power supply, controlling flash flow through electrode movement, controlling welding current and welding time through AC controller. When the end surface of the welder reaches the melting state, the power supply is turned off and the upsetting force is applied to form the welding joint.

VIEW

Manual Integrated Transgun

It is a kind of welding transformer and electrode arm connected together with a unique suspension system design, so that it can rotate freely in XYZ direction, to ensure the operating easy. There are H and L two series products to meet different application, and designed with component modules, good integrity and high reliability.

VIEW

Robotic Welding Gun With Servo Actuator

It is a welding transformer and electrode arm connected together in a welding gun that can be connected to a robot arm, currently used in large quantities in the auto body industry, C-type welding gun and X-type welding gun share the same gun body, interchangeability, high modularity, interchangeability rate of more than 90%

VIEW

Bench Spot/Press Welder

VIEW